Kia EV Charger
Installation Toronto
ESA-certified Level 2 home charger installation for your EV6, EV9 & Niro EV in Toronto and across the GTA. Permit included, same-week booking.
Get a Free Quote
We will call you within 2 hours.
Kia Charging Specs by Model
| Model | Battery | Recommended Circuit | Charge Rate |
|---|---|---|---|
| EV6 Standard Range | 58 kWh | 48A / 11.5 kW | ~29 km/hr |
| EV6 Long Range | 77.4 kWh | 48A / 11.5 kW | ~29 km/hr |
| EV9 AWD | 99.8 kWh | 48A / 11.5 kW | ~29 km/hr |
| Niro EV | 64.8 kWh | 40A / 9.6 kW | ~24 km/hr |
Recommended Charger
Any 48A J1772 Level 2 charger (ChargePoint Home Flex, Grizzl-E, or Wallbox Pulsar)
Charger Details
Kia EVs use the standard J1772 connector. Any CSA-certified Level 2 charger works. We supply or install your own unit.
Most Kia EVs charge comfortably on a 40A or 48A circuit. A 100A panel is sufficient with EVEMS load management if needed. Learn about ESA permits.
What is Included in Every Installation
Panel inspection, cable routing plan, charger placement recommendation.
40A, 48A, or 80A circuit sized to your exact model.
Filed before we arrive. Inspector closes the permit after completion.
Hardwired or plug-in installation, tested and commissioned on-site.
Any wiring issue after install is fixed at no charge.
We provide the permit certificate you need for federal EVAP rebate claims.
Ready to Charge Your Kia at Home?
Same-week installation across Toronto, Mississauga, Vaughan, Markham, Oakville and the GTA. ESA permit included.